Panda 4000s.Neo PMS

General Technical Data

Model.:Panda 4000s.Neo PMS
Generator TypeGenerators with regulated speed (3000 rpm 50 Hz)
  • Brushless
  • No signal noise
  • No rotating coils or diodes
  • Precise control
  • High protection rating
  • Perfect sine wave
  • Short-circuit stability
  • Water-cooled
  • Overload protection
Generator Family4000s.Neo
    Generator Version.:PMS
    • Suitable for internal installation
    • Low ambient temperatures
    • External control panel with cable
    • Dual circuit cooling
    Article number.:0014668 ( <2017 : 01.01.01.170P)
    Additional Features
      Area of Application.:Marine Generator (M)
      Frequency [Hz]50
      Generator manufacturerFischer Panda GmbH
      Isolation class of windingsH
      Frequency [Hz]50
      Nominal Speed [rpm]3000
      Voltage Regulationkeine

      Electrical Alternator

      Daten Winding (Single Phase Version) - Standard version
      Nominal Voltage in Volt230
      Nominal Performance in kW1)3.40
      Nominal Performance in kVA4.2
      Continuous Performance in kW3
      Continuous Performance in kVA3.8
      Number of Phases1
      Frequency [Hz] 50


      All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

      Engine Data

      Engine ManufacturerFischer Panda GmbH (FP)
      Engine TypeFP320
      No. Cylinders1
      Displacement [cm3]309
      Starter System12V

      Sound Insulation Cover (Generator Housing / Sound Shield)

       

      VersionGFK 3D
      Article Number0014668
      =< 2016 (01.01.01.170P)
      CAD REF:0014669
      Drawing Ref.FP1-048597
      Sound Cover TypeGFK (Glass fibre reinforced polyester)
      Sound Insulation Material3D
      Dimensions Housing    L x W x H *) *)) Refer to Capsule Drawing of Sound Shield
      Total Weight of Generator with Capsule Refer to Capsule Drawing of Sound Shield
      Sound Cover Upgrade Options (on request)->MPL 4DS

      Disclaimer

      All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

      *) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

      Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

      **) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.

      Service- / installation kits and shock mountings

      Note: Actual Service- / installation kits and shock mountings may differ from those displayed depending on Generator type.

      Service kit


      Service Kit "PLus"


      Installation Kit Basic (without exhaust/water separator)


      Installation kit Premium (with exhaust/water separator)


      Shock-mounting, captive


      Shock-mounting, non-captive

      Panda 4000s.Neo Generator Versions


      Share