Panda 18x-400V PVK-UK

General Technical Data

Model.:Panda 18x-400V PVK-UK
Generator TypeGenerators with regulated speed (3000 rpm 50 Hz)
  • Brushless
  • No signal noise
  • No rotating coils or diodes
  • Precise control
  • High protection rating
  • Perfect sine wave
  • Short-circuit stability
  • Water-cooled
  • Overload protection
Generator Family18x-400V
    Generator Version.:PVK-UK
    • Metal capsule with a heavy duty cover
    • Wide access hatch for easier access
    • Sound insulation capsule
    • No additional exhaust silencer required
    • Integrated radiator and cooling system
    • Designed for mounting externally on the vehicle chassis
    Article number.:
    Additional Features
    • Watercooling for Engine and Winding (Single-Circuit Cooling)
    • 12V/10A Alternator for charging the starter battery
    Area of Application.:Vehicle Generator (V)
    Frequency [Hz]50
    Generator manufacturerFischer Panda GmbH
    Isolation class of windingsH
    Nominal Speed [rpm]3000
    Voltage RegulationxControl
    Power rating factor Cos Pi0.85
    Excitation byMKP Capacitors

    Electrical Alternator

    Three Phase Version (Standard version)

    Alternator TypeHP3
    Nominal Voltage in Volt [V]400
    Power rating factor Cos Pi0.85
    Nominal Performance in kW1)15.30
    Nominal Performance in kVA1)18.0
    Continuous Performance in kW1)13.8
    Continuous Performance in kVA1)16.2
    Number of Phases3
    Frequency [Hz]50

    1) up to Panda 15000 / 12-4 cosPhi 0,85 for short take-off power to inductive loads, otherwise cosPhi1
    1) from Panda 18 /17-4 on cosPhi 0,85 optional startup performance with compensation or starting current boost, otherwise cosPhi1


    All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

    Engine Data

    Engine ManufacturerKubota (KU)
    Engine TypeD1105
    No. Cylinders3
    Displacement [cm3]1123
    Starter System12V (24V Optional)

    Sound Insulation Cover (Generator Housing / Sound Shield)

     

    VersionMPL 4DS
    Article Numberon request
    =< 2016 ()
    CAD REF:
    Drawing Ref.on request
    Sound Cover TypeMPL (Metal Professional Line)
    Sound Insulation Material4DS
    Dimensions Housing    L x W x H *) *)) Request - Please contact us
    Total Weight of Generator with Capsule Request - Please contact us
    Sound Cover Upgrade Options (on request)->MPL 6DS

    Disclaimer

    All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

    *) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

    Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

    **) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.

    Service- / installation kits and shock mountings

    Note: Actual Service- / installation kits and shock mountings may differ from those displayed depending on Generator type.

    Service kit


    Service Kit "PLus"

    Shock-mounting, captive



    Share