Panda 45 PMS

General Technical Data

Model.:Panda 45 PMS
Generator TypeGenerators with regulated speed (3000 rpm 50 Hz)
  • Brushless
  • No signal noise
  • No rotating coils or diodes
  • Precise control
  • High protection rating
  • Perfect sine wave
  • Short-circuit stability
  • Water-cooled
  • Overload protection
Generator Family45
  • external 12V fuel pump
Generator Version.:PMS
  • Suitable for internal installation
  • Low ambient temperatures
  • External control panel with cable
  • Dual circuit cooling
Article number.:0014717 ( <2017 : 01.03.01.007P)
Additional Features
  • Alternator for charging the starter battery
Area of Application.:Marine Generator (M)
Frequency [Hz]50
Generator manufacturerFischer Panda GmbH
Isolation class of windingsH
Nominal Speed [rpm]3000
Voltage RegulationVCS
Voltage Tolerance with VCS (up to 80% Performance)± 3V
Power rating factor Cos Pi0.85
Excitation byMKP Capacitors

Electrical Alternator

Single Phase Winding - Optional

Alternator TypeHP1
Nominal Voltage in Volt230
Power rating factor Cos Pi0.85
Nominal Performance in kW1)39.00
Nominal Performance in kVA1)45.9
Continuous Performance in kW1)35.1
Continuous Performance in kVA1)41.3
Number of Phases1
Frequency [Hz] 50

1) up to Panda 15000 / 12-4 cosPhi 0,85 for short take-off power to inductive loads, otherwise cosPhi1
1) from Panda 18 /17-4 on cosPhi 0,85 optional startup performance with compensation or starting current boost, otherwise cosPhi1

Three Phase Version (Standard version)

Alternator TypeHP3
Nominal Voltage in Volt [V]400
Power rating factor Cos Pi0.85
Nominal Performance in kW1)39.00
Nominal Performance in kVA1)45.9
Continuous Performance in kW1)35.1
Continuous Performance in kVA1)41.3
Number of Phases3
Frequency [Hz]50

1) up to Panda 15000 / 12-4 cosPhi 0,85 for short take-off power to inductive loads, otherwise cosPhi1
1) from Panda 18 /17-4 on cosPhi 0,85 optional startup performance with compensation or starting current boost, otherwise cosPhi1


All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

Engine Data

Engine ManufacturerLombardini (LO)
Engine TypeLDW 2204MT
No. Cylinders4
Displacement [cm3]2199
Starter System12V (24V Optional)

Sound Insulation Cover (Generator Housing / Sound Shield)

 

VersionMPL 4DS
Article Number0014717
=< 2016 (01.03.01.007P)
CAD REF:0000346
Drawing Ref.FP1-021033
Sound Cover TypeMPL (Metal Professional Line)
Sound Insulation Material4DS
Dimensions Housing    L x W x H *) *)) Refer to Capsule Drawing of Sound Shield
Total Weight of Generator with Capsule Refer to Capsule Drawing of Sound Shield
Sound Cover Upgrade Options (on request)->MPL 6DS

Disclaimer

All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

*) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

**) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.

Documentation

Control - P6+

Articlenumber : 0000139

      
 

Generator Handbook / Operators Manual

 

Capsule / Sound shield Drawing : FP1-021033

Articlenumber:0014717 ( < 2017 : 01.03.01.007P)
High Resolution Image: Panda 45 PMS (p45l p1.jpg) 
High Resolution Image: Panda 45 PMS (p45l p2.jpg) 
High Resolution Image: Panda 45 PMS (p45l p3.jpg) 

Service- / installation kits and shock mountings

Note: Actual Service- / installation kits and shock mountings may differ from those displayed depending on Generator type.

Service kit


Service Kit "PLus"


Installation Kit Basic (without exhaust/water separator)

21.03.04.099


Installation kit Premium (with exhaust/water separator)

21.03.04.112


Shock-mounting, captive

32.30.01.010H


Shock-mounting, non-captive

Panda 45 Generator Versions


Share