Panda 4200 FC PMS
Print Preview as Datasheet
General Technical Data
|Model.:||Panda 4200 FC PMS|
|Generator Type||Basic Line - Panda Standard Asynchronous|
|Generator Family||4200 FC|
- Easy to install
- Suitable for internal installation
- Low ambient temperatures
- External control panel with cable
- incl. Seawater impeller pump
- incl. Freshwater (coolant) pump
- Heat Exchanger for Engine and Winding (dual circuit cooling)
|Area of Application.:||Marine Generator (M)|
|Generator manufacturer||Fischer Panda GmbH|
|Isolation class of windings||H|
|Nominal Speed [rpm]||3600|
|Power rating factor Cos Pi||1.00|
|Excitation by||MKP Capacitors|
Single Phase Winding - Standard version
|Nominal Voltage in Volt||120|
|Nominal Performance in kW||4.20|
|Nominal Performance in kVA||4.2|
|Continuous Performance in kW||3.7|
|Continuous Performance in kVA||3.8|
|Number of Phases||1|
|Frequency [Hz] ||60|
All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.
|Engine Manufacturer||Farymann (FA)|
|Bore x Displacement||82 x 55|
|Starter System||12V (24V Optional)|
Sound Insulation Cover (Generator Housing / Sound Shield)
|Sound Cover Type||GFK (Glass fibre reinforced polyester)|
|Sound Insulation Material||3D|
|Dimensions Housing L x W x H *) *))|| Request - Please contact us |
|Total Weight of Generator with Capsule || Request - Please contact us |
|Sound Cover Upgrade Options (on request)||->MPL 4DS|
All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.
*) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.
Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.
**) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.