Panda 45 PMS

General Technical Data

Model.:	Panda 45 PMS
Generator Type	Premium Line - Panda Standard Asynchronous (50 Hz) Brushless No signal noise No rotating coils or diodes Precise control High protection rating Perfect sine wave Short-circuit stability Water-cooled Overload protection
Generator Family	45 external 12V fuel pump
Generator Version.:	PMS Easy to install Suitable for internal installation Low ambient temperatures External control panel with cable incl. Seawater impeller pump incl. Freshwater (coolant) pump Heat Exchanger for Engine and Winding (dual circuit cooling)
Additional Features	Alternator for charging the starter battery
Area of Application.:	Marine Generator (M)
Frequency [Hz]	50
Generator manufacturer	Fischer Panda GmbH
Isolation class of windings	H
Nominal Speed [rpm]	3000
Voltage Regulation	VCS
Voltage Tolerance with VCS (up to 80% Performance)	± 3V
Power rating factor Cos Pi	1.00
Excitation by	MKP Capacitors

1-Phase (230V)
3-Phase (400V)

Single Phase Winding - Optional

Alternator Type	HP1
Nominal Voltage in Volt	230
Nominal Performance in kW	39.00
Nominal Performance in kVA	39.0
Continuous Performance in kW	35.1
Continuous Performance in kVA	35.1
Number of Phases	1
Rated current each Phase in Ampere [A]	169.6
Continuous current each Phase in Ampere	152.6
Frequency [Hz]	50

Three Phase Version (Standard version)

Alternator Type	HP3
Nominal Voltage in Volt [V]	400
Nominal Performance in kW	39.00
Nominal Performance in kVA	39.0
Continuous Performance in kW	35.1
Continuous Performance in kVA	35.1
Number of Phases	3
Rated current each Phase in Ampere [A]	56.4
Continuous current each Phase in Ampere [A]	50.7
Frequency [Hz]	50

All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

Engine Data

Engine Manufacturer	Lombardini (LO)
Engine Type	LDW 2204MT
No. Cylinders	4
Displacement [cm³]	2199
Starter System	12V (24V Optional)

Sound Insulation Cover (Generator Housing / Sound Shield)

Fischer Panda Generator Capsule Drawing REF:FP1-021033.jpg

Version	MPL 4DS
Sound Cover Type	MPL (Metal Professional Line)

Sound Insulation Material	4DS
Dimensions Housing L x W x H ^{) ))}	Refer to Capsule Drawing of Sound Shield
Total Weight of Generator with Capsule	Refer to Capsule Drawing of Sound Shield
Sound Cover Upgrade Options (on request)	->MPL 6DS

Disclaimer

All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

*) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

**) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.

Downloads



	Capsule / Sound shield Drawing:FP1-021033.pdf

	Additional information:Genset_Equipment_and_Accessories _2013v8-2_eng_englisch.pdf
	Additional information:General_Information_for_Marine_Generators_English.R13.pdf