Panda 110-4 PVM-NE

General Technical Data

Model.:	Panda 110-4 PVM-NE
Generator Type	Heavy Duty Line (1800 rpm / 60 Hz)
Generator Family	110-4 external 12V fuel pump
Generator Version.:	PVM-NE Suitable for internal installation Requires external radiator Easy to install No additional silencer is necessary. incl. Freshwater (coolant) pump
Additional Features	Watercooling for Engine and Winding (Single-Circuit Cooling)
Area of Application.:	Vehicle Generator (V)
Frequency [Hz]	60
Generator manufacturer	Fischer Panda GmbH
Isolation class of windings	H
Nominal Speed [rpm]	1800
Voltage Regulation	VCS
Voltage Tolerance with VCS (up to 80% Performance)	± 3V
Power rating factor Cos Pi	1.00
Excitation by	MKP Capacitors

Three Phase Version (Standard version)

Alternator Type	HP3
Nominal Voltage in Volt [V]	208
Nominal Performance in kW	110.70
Nominal Performance in kVA	110.7
Continuous Performance in kW	99.6
Continuous Performance in kVA	99.6
Number of Phases	3
Frequency [Hz]	60

All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

Engine Data

Engine Manufacturer	Deutz (DZ)
Engine Type	BF6M1013E
No. Cylinders	6
Displacement [cm³]	7146
Starter System	12V (24V Optional)

Sound Insulation Cover (Generator Housing / Sound Shield)

Version	MPL 4DS
Sound Cover Type	MPL (Metal Professional Line)

Sound Insulation Material	4DS
Dimensions Housing L x W x H ^{) ))}	Request - Please contact us
Total Weight of Generator with Capsule	Request - Please contact us
Sound Cover Upgrade Options (on request)	->MPL 6DS

Disclaimer

All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

*) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

**) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.