20 Reasons for choosing a Fischer Panda Generators
Fischer Panda is the manufacturer of all essential components
Fischer Panda develops and produces all essential component parts itself, with one exception ; the engine.
The Super Silent Sound Insulation system
Along with their very compact dimensions, our generators super silent sound insulation is a very distinguishing characteristic. A correctly installed and running generator in use runs almost unnoticed.
The sound insulation cover is available in different versions (either as GFK - glass reinforced fibre-glass polyester and hand sprayed or MPL in polished high grade steel or white sprayed aluminium. Both are lined with sound insulating material from 25 to 60 mm thick)
Water-cooled Generator and Engine
The cooling system is very efficient and provides reliable cooling even at extreme temperatures. Only with an optimal and functioning cooling system, can running temperatures in the capsule be kept at an acceptable level when the best sound insulation is required.
Panda Guarantee: 1 plus 4 Years
Our high standard of quality allows us, in addition to the normal one year guarantee for the generator, to also provide a further four year guaranty in the event that corrosive damage is incurred to the electrical parts of the generator due to the water-cooling system.
3000 rpm and 1500 rpm engine speeds
A conventional generator has to run at 3000 or 1500 rpm, in order to produce an alternating current with a frequency of 50 Hz.
Alongside the range of models from 3 to 60 kVA with 3000 rpm we also offer models with 1500 rpm in a range from 2,5 upto 100 kVA.
However, a fast running diesel is normally the preferred choice for our models up to 25 kVA .
Voltage Stability with "VCS" System (Tolerance ± 3 Volt)
Fischer Panda developed and patented an electronic control system for the generator and engine. VCS guarantees a stable voltage for loads from 0 to 80 % with a voltage tolerance of only ± 3 Volt.
ASB - Starting current improved up to 300%
Every generator since early 1998, starting with the Panda 4000, is supplied with the integrated Automatic Start Booster "ASB" as standard. This produces a peak current, which is up to 300 % higher. Air conditioning systems and other electric motors can, as a rule, be started individually without a problem. For example, a Panda 4000 can start and constantly power two air conditioning units with a total of 28.000 BTU (i.e. 12.000 and 16.000 BTU).
The Panda asynchronus generator supplies an especially clean sinus curve. This guarantees the smooth running of electronic devices such as tooling machines, charging devices, microwave ovens, computers, navigation systems etc.
Panda for Auxiliary Drive
The majority of Panda generators have been constructed so that the full nominal capacity can be transferred to a further auxiliary device by means of the shaft running through the generator. This makes the Panda generator suitable as a combi-generator with additionally fitted hydraulic pumps, ferry drives, boat driving drives etc.
Panda "HP" - The High-Performance Generator
The Panda Generator has been continually perfectionised over the last few years. It is now so optimized that it produces approx 15% higher performance when compared to other conventional systems.
In order to cater for todays diverse requirements, there are four different models of generators available:
Panda HP1 -
Optimized Standard Winding for 230 V AC with 1 phase only
Panda HP3 -
produces 3 phase current with a 230V single phase included, however its must be distributed over all 3 phases.
Panda DVS -
(Dual voltage) 1 and 3 phase windings on one system 230 V / 400 V
Panda AGT -
An specially effective battery charging generator