Panda 5000i.Neo PMS

General Technical Data

Model.:Panda 5000i.Neo PMS
Generator TypePanda i-Series (50 Hz)
  • Digital display
  • Environmentally friendly - low fuel consumption
  • Variable speed - load-dependent
  • Easy to install - reduces costs
  • Small size and low weight - compact installation
  • High starting capacity for air conditioners / diving compressors
  • Highly efficient - maximum energy
  • Pure sinus wave is ideal for sensitive electronics
Generator Family5000i.Neo
    Generator Version.:PMS
    • Suitable for internal installation
    • Low ambient temperatures
    • External control panel with cable
    • Dual circuit cooling
    Article number.:0000227 ( <2017 : 03.05.01.080P)
    Additional Features
    • Water-cooled Engine
    Area of Application.:Marine Generator (M)
    Frequency [Hz]50
    Generator manufacturerFischer Panda GmbH
    Isolation class of windingsH
    Nominal Speed [rpm]2500-3250 rpm
    Voltage RegulationiControl2
    Power rating factor Cos Pi0.80

    Electrical Alternator

    Single Phase Version with Inverter Technology

    Engine Speed [rpm]2500 - 3250
    Nominal Voltage in Volt230
    Nominal Performance in kW)1)0-4.00
    Nominal Performance in kVA1)0-5.0
    Continuous Performance in kW1)0-3.6
    Continuous Performance in kVA1)0-4.5
    Number of Phases1
    Max. Rated Inrush Current in Ampere
    Frequency [Hz]50

    1) cosPhi 0,8 up to 40°C ambient temperature, otherwise cosPhi 1 up to 50°C


    All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

    Engine Data

    Engine ManufacturerFischer Panda GmbH (FP)
    Engine TypeFP320
    No. Cylinders1
    Displacement [cm3]309
    Starter System12V

    Sound Insulation Cover (Generator Housing / Sound Shield)

     

    VersionGFK 3D
    Article Number0000227
    =< 2016 (03.05.01.080P)
    CAD REF:0013348
    Drawing Ref.FP1-051488
    Sound Cover TypeGFK (Glass fibre reinforced polyester)
    Sound Insulation Material3D
    Dimensions Housing    L x W x H *) *)) Refer to Capsule Drawing of Sound Shield
    Total Weight of Generator with Capsule Refer to Capsule Drawing of Sound Shield

    Disclaimer

    All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

    *) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

    Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

    **) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.

    Documentation

    Control - iControl

    Articlenumber : 0000549

         
     

    Generator Handbook / Operators Manual

       

    Capsule / Sound shield Drawing : FP1-051488

    Articlenumber:0000227 ( < 2017 : 03.05.01.080P)
    High Resolution Image: Panda 5000i.Neo PMS (5000iNeo p1 3d capped transP1540659.JPG) 
    High Resolution Image: Panda 5000i.Neo PMS (5000iNeo p2 P1540650.JPG) 
    High Resolution Image: Panda 5000i.Neo PMS (5000iNeo p3 P1540640.JPG) 

    Service- / installation kits and shock mountings

    Note: Actual Service- / installation kits and shock mountings may differ from those displayed depending on Generator type.

    Service kit

    0015691


    Service Kit "PLus"


    Installation Kit Basic (without exhaust/water separator)

    0000677


    Installation kit Premium (with exhaust/water separator)

    0000674


    Shock-mounting, captive

    0002750


    Shock-mounting, non-captive

    0009669

    Panda 5000i.Neo Generator Versions


    Share