Datasheet: Marine Generator - Panda 50 YA PMS

Fischer Panda Diesel Generator Marine Generator - Panda 50 YA PMS target=_new

Acutal generator may differ slightly to that in picture

A - General technical data Marine Generator - Panda 50 YA PMS
Model.:	Panda 50 YA PMS
Area of Application.:	M (Marine Generator)
Generator Version.:	PMS
Generator Type	PSA - Premium Line - Panda Standard Asynchronous
Frequency	50	[Hz]
Nominal Speed	3000	[rpm]
Alternator Standard Version.:	HP3
Nominal Performance	42.50	[kW]
Nominal Performance	50.0	[kVA]
Continuous Performance	38.2	[kW]
Continuous Performance	45.0	[kVA]
B - Alternator General Data
Power rating factor Cos Pi	0.85
Voltage Regulation	VCS
Voltage Tolerance with VCS (up to 80% Performance	± 3	[Volt]
Generator manufacturer	FISCHER PANDA
Shielded to prevent radio interference	accordance with VDE 0875
Isolation class of windings	F
Excitation by	MKP Capacitors

C - Performance Data for electrical Generator (Alternator)
Daten HP3 Coil (Three Phase Version) - Standard version
Alternator Type "HP3" (High Performance 3 phase winding). Produces 3-phase current (400 V), but 230 V single phase is included, but must be distributed to 3 phases.
Alternator Type	HP3
Nominal Voltage in Volt	3x400+N	[Volt]
Nominal Performance in kW	42.50	[kW]
Nominal Performance in kVA	50.0	[kVA]
Continuous Performance in kW	38.2	[kW]
Continuous Performance in kVA	45.0	[kVA]
Number of Phases	3
Rated current each Phase in Ampere	72.3	[A]
Continuous current each Phase in Ampere	65.0	[A]
Frequency in Hertz	50	[Hz]


D - Sound Insulation Cover (generator housing)


Capsule MPL 4DS - Standard Sound Insulation Capsule
Description	MPL 4DS
Material	MPL
Sound Insulation Material	4DS - 4 to 5 layers, thickness approx. 40 mm
Dimensions Housing L x W x H ^*)	Refer to Capsule Drawing of Sound Shield
Total Weight of Generator with Capsule	Refer to Capsule Drawing of Sound Shield
) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc. Therefore please Note* You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

E - Engine Data
Engine Manufacturer	Yanmar ()
Engine Type	4JH4TE
No. Cylinders	4
Bore and Displacment	1995	[ccm]

F - Downloads

Capsule Drawings
	P50 YA PMS.pdf
Installation and Service Kits
	Installation Service Guide 2009 Buch R01.pdf

All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.