Datasheet: Vehicle Generator - Panda 15.000 NE PVMV-N

A - General technical data Vehicle Generator - Panda 15.000 NE PVMV-N
Model.:	Panda 15.000 NE PVMV-N
Area of Application.:	V (Vehicle Generator)
Generator Version.:	PVMV-N
Generator Type	PSA - Premium Line - Panda Standard Asynchronous
Frequency	50	[Hz]
Nominal Speed	3000	[rpm]
Alternator Standard Version.:	HP1
Nominal Performance	12.90	[kW]
Nominal Performance	15.2	[kVA]
Continuous Performance	11.6	[kW]
Continuous Performance	13.7	[kVA]
B - Alternator General Data
Power rating factor Cos Pi	0.85
Voltage Regulation	VCS
Voltage Tolerance with VCS (up to 80% Performance	± 3	[Volt]
Generator manufacturer	FISCHER PANDA
Shielded to prevent radio interference	accordance with VDE 0875
Isolation class of windings	F
Excitation by	MKP Capacitors

C - Performance Data for electrical Generator (Alternator)
Daten HP1 Coil (Single Phase Version) - Standard version
Alternator Type "HP1" (High Performance 1 phase Winding), 230 V only.
Alternator Type	HP1
Nominal Voltage in Volt	230	[Volt]
Nominal Performance in kW	12.90	[kW]
Nominal Performance in kVA	15.2	[kVA]
Continuous Performance in kW	11.6	[kW]
Continuous Performance in kVA	13.7	[kVA]
Number of Phases	1
Rated current each Phase in Ampere	66.1	[A]
Continuous current each Phase in Ampere	59.6	[A]
Frequency in Hertz	50	[Hz]

Daten HP3 Coil (Three Phase Version) - Optional - This version available on request
Alternator Type "HP3" (High Performance 3 phase winding). Produces 3-phase current (400 V), but 230 V single phase is included, but must be distributed to 3 phases.
Alternator Type	HP3
Nominal Voltage in Volt	3x400+N	[Volt]
Nominal Performance in kW	12.90	[kW]
Nominal Performance in kVA	15.2	[kVA]
Continuous Performance in kW	11.6	[kW]
Continuous Performance in kVA	13.7	[kVA]
Number of Phases	3
Rated current each Phase in Ampere	22.0	[A]
Continuous current each Phase in Ampere	19.8	[A]
Frequency in Hertz	50	[Hz]

Daten DVS Coil (3 phase + 1 phase Version) - Optional - This version available on request
The Alternator Type "DVS" (Dual Voltage System) comprises of two seperate windings (1-phase and 3-phase) within the stator. The alternator comprises a 3-phase (400V) winding and a 1-phase (230V) winding. The windings are electrically isolated within same stator. This alternator type has a 12% reduction in performance, compared to the HP1 resp. HP3 winding type because the cross-section of the windings are reduced in order to fit both windings within the housing.
DVS Winding - 1 phase
Alternator Type	DVS
Nominal Voltage in in Volt	230	[Volt]
Nominal Performance (P) in kW	11.4	[kW]
Nominal Performance (S) in kVA	13.4	[kVA]
Continuous Performance in kW	10.3	[kW]
Continuous Performance in kVA	12.1	[kVA]
Number of Phases	1
Rated current each Phase in Ampere	58.3	[A]
Continuous current each Phase in Ampere	52.6	[A]
Frequency	50	[Hz]
DVS Winding - 3 phase
Alternator Type	DVS
Nominal Voltage in Volt	3x400+N	[Volt]
Nominal Performance (P) in kW	11.4	[kW]
Nominal Performance (S) in kVA	13.4	[kVA]
Continuous Performance in kW	10.3	[kW]
Continuous Performance in kVA	12.1	[kVA]
Number of Phases	3
Rated current each Phase in Ampere	19.4	[A]
Continuous current each Phase in Ampere	17.5	[A]
Frequency in Hertz	50	[Hz]


D - Sound Insulation Cover (generator housing)


Capsule GFK 4DS - Standard Sound Insulation Capsule
Description	GFK 4DS
Material	GFK (Glass fibre reinforced polyester)
Sound Insulation Material	4 layers with a total thickness of 40 mm.
Dimensions Housing L x W x H ^*)	Refer to Capsule Drawing of Sound Shield
Total Weight of Generator with Capsule	Refer to Capsule Drawing of Sound Shield
) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc. Therefore please Note* You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

E - Engine Data
Engine Manufacturer	Kubota (KU)
Engine Type	D902
No. Cylinders	3
Bore and Displacment	878	[ccm]

F - Downloads

Capsule Drawings
	P15000 NE PVMV-N 1A-FP1-007573.pdf

All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.