Panda 8000i PVK-UK

General Technical Data

Model.:Panda 8000i PVK-UK
Generator TypePanda i-Series (50 Hz)
  • Digital display
  • Environmentally friendly - low fuel consumption
  • Variable speed - load-dependent
  • Easy to install - reduces costs
  • Small size and low weight - compact installation
  • High starting capacity for air conditioners / diving compressors
  • Highly efficient - maximum energy
  • Pure sinus wave is ideal for sensitive electronics
Generator Family8000i
  • external 12V fuel pump
Generator Version.:PVK-UK
  • Metal capsule with a heavy duty cover
  • Wide access hatch for easier access
  • Sound insulation capsule
  • No additional exhaust silencer required
  • Integrated radiator and cooling system
  • Designed for mounting externally on the vehicle chassis
Article number.:0015516
Additional Features
  • Water-cooled Engine
  • 12V/10A Alternator for charging the starter battery
Area of Application.:Vehicle Generator (V)
Frequency [Hz]50
Generator manufacturerFischer Panda GmbH
Isolation class of windingsH
Nominal Speed [rpm]2200-2800 rpm
Voltage RegulationiControl
Voltage Tolerance±3%
Power rating factor Cos Pi0.8

Electrical Alternator

Single Phase Version with Inverter Technology

Engine Speed [rpm]2200 - 2800
Nominal Voltage in Volt230
Nominal Performance in kW)1)0-6.4
Nominal Performance in kVA1)0-8.0
Continuous Performance in kW1)0-5.7
Continuous Performance in kVA1)0-7.2
Number of Phases1
Max. Rated Inrush Current in Ampere75A
Frequency [Hz]50

1) cosPhi 0,8 up to 40°C ambient temperature, otherwise cosPhi 1 up to 50°C

The technical parameters / output performance may vary for different generator types and exhaust emission norms for different countries.

All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

Engine Data

Engine ManufacturerKubota (KU)
Engine TypeZ482
No. Cylinders2
Displacement [cm3]479
Starter System12V (24V Optional)

Sound Insulation Cover (Generator Housing / Sound Shield)


VersionMPL 4DS
Article NumberGVS: 0015516
CAD REF:0005537
Drawing Ref.FP1-040118
Sound Cover TypeMPL (Metal Professional Line)
Sound Insulation Material4DS
Dimensions Housing    L x W x H *) *)) Refer to Capsule Drawing of Sound Shield
Total Weight of Generator with Capsule Refer to Capsule Drawing of Sound Shield
Sound Cover Upgrade Options (on request)->MPL 6DS


All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

*) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

**) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.


Control - iControl (icontrol)

Articlenumber :


Generator Handbook / Operators Manual


Capsule / Sound shield Drawing : FP1-040118


Service- / installation kits and shock mountings

Note: Actual Service- / installation kits and shock mountings may differ from those displayed depending on Generator type.