Panda 4000s.Neo PMS

Fischer Panda Generator Capsule Drawing REF:FP1-048597.jpg

General Technical Data

Model.:	Panda 4000s.Neo PMS
Generator Type	Generators with regulated speed (3000 rpm 50 Hz) Brushless No signal noise No rotating coils or diodes Precise control High protection rating Perfect sine wave Short-circuit stability Water-cooled Overload protection
Generator Family	4000s.Neo
Generator Version.:	PMS Suitable for internal installation Low ambient temperatures External control panel with cable Dual circuit cooling
Article number.:	0014668
Additional Features
Area of Application.:	Marine Generator (M)
Frequency [Hz]	50
Generator manufacturer	Fischer Panda GmbH
Isolation class of windings	H
Frequency [Hz]	50
Nominal Speed [rpm]	3000
Voltage Regulation	keine

Electrical Alternator

Daten Winding (Single Phase Version) - Standard version
Nominal Voltage in Volt	230
Nominal Performance in kW¹⁾	3.40
Nominal Performance in kVA	4.0
Continuous Performance in kW	3
Continuous Performance in kVA	3.6
Number of Phases	1
Frequency [Hz]	50

All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

Engine Data

Engine Manufacturer	Fischer Panda GmbH (FP)
Engine Type	FPE320
No. Cylinders	1
Displacement [cm³]	309
Starter System	12V

Sound Insulation Cover (Generator Housing / Sound Shield)

PDF

Version	GFK 3D
Article Number	0014668 CAD REF:0014669
Drawing Ref.	FP1-048597
Sound Cover Type	GFK (Glass fibre reinforced polyester)
Sound Insulation Material	3D
Dimensions Housing L x W x H ^{) ))}	Refer to Capsule Drawing of Sound Shield
Total Weight of Generator with Capsule	Refer to Capsule Drawing of Sound Shield

Disclaimer

All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

*) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

**) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.

Documentation

	Control - P4+ Articlenumber : 0013582
	Generator Handbook / Operators Manual
	Capsule / Sound shield Drawing : FP1-048597 Articlenumber:0014668 ( < 2017 : 01.01.01.170P)
	High Resolution Image: Panda 4000s.Neo PMS (P1570635 4000s.JPG)
	High Resolution Image: Panda 4000s.Neo PMS (P1570635 4000s trans.jpg)
	High Resolution Image: Panda 4000s.Neo PMS (P1570636 4000s.JPG)