AGT 4000-12V PMS

General Technical Data

Model.:	AGT 4000-12V PMS
Generator Type	Direct Current (DC) Line Designed for DC-AC Power Systems with battery and inverter Generator only needs to run when battery bank requires charging Optimal utilization of the generator High degree of efficiency Compact Design Lower fuel consumption DC / AC DAPS => Optimal Power Systems
Generator Family	4000-12V external 12V fuel pump
Generator Version.:	PMS Suitable for internal installation Low ambient temperatures External control panel with cable Dual circuit cooling
Article number.:
Additional Features
Area of Application.:	Marine Generator (M)
Frequency [Hz]	400
Generator manufacturer	Fischer Panda GmbH
Isolation class of windings	H
Winding Type	Permanent Magnet
Charging Voltage	Direct

Electrical Alternator

Engine Speed [rpm]	On request
Nominal Performance ¹⁾	3.2
Continuous Performance [kW] ¹⁾	03.20
Nominal Voltage [V] ¹⁾	12V
Constant current rate [A]	Current dependent upon voltage
Peak current rate [A]	Current dependent upon voltage

The technical parameters / output performance may vary for different generator types and exhaust emission norms for different countries.

All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

Engine Data

Engine Manufacturer	Kubota (KU)
Engine Type	EA300
No. Cylinders	1
Displacement [cm³]	309
Starter System	12V (24V Optional)

Sound Insulation Cover (Generator Housing / Sound Shield)

Version	GFK 3D
Article Number	GVS: CAD REF:
Drawing Ref.	on request
Sound Cover Type	GFK (Glass fibre reinforced polyester)
Sound Insulation Material	3D
Dimensions Housing L x W x H ^{) ))}	Request - Please contact us
Total Weight of Generator with Capsule	Request - Please contact us
Sound Cover Upgrade Options (on request)	->MPL 4DS

Disclaimer

All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

*) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

**) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.

Documentation

	High Resolution Image: AGT 4000-12V PMS (4000 agt pms p1.JPG)
	High Resolution Image: AGT 4000-12V PMS (4000 agt pms p2.JPG)
	High Resolution Image: AGT 4000-12V PMS (4000 agt pms p3.JPG)