Panda 24 PVK-UK

Fischer Panda Generator Capsule Drawing REF:FP1-024298.jpg

General Technical Data

Model.:	Panda 24 PVK-UK
Generator Type	Generators with regulated speed (3000 rpm 50 Hz) Brushless No signal noise No rotating coils or diodes Precise control High protection rating Perfect sine wave Short-circuit stability Water-cooled Overload protection
Generator Family	24
Generator Version.:	PVK-UK Metal capsule with a heavy duty cover Wide access hatch for easier access Sound insulation capsule No additional exhaust silencer required Integrated radiator and cooling system Designed for mounting externally on the vehicle chassis
Article number.:	0015348
Additional Features	Watercooling for Engine and Winding (Single-Circuit Cooling)
Area of Application.:	Vehicle Generator (V)
Frequency [Hz]	50
Generator manufacturer	Fischer Panda GmbH
Isolation class of windings	H
Nominal Speed [rpm]	3000
Voltage Regulation	VCS
Voltage Tolerance with VCS (up to 80% Performance)	± 3V
Power rating factor Cos Pi	0.85
Excitation by	MKP Capacitors

Electrical Alternator

Single Phase Winding - Standard version

Alternator Type	HP1
Nominal Voltage in Volt	230
Power rating factor Cos Pi	0.85
Nominal Performance in kW¹⁾	20.4
Nominal Performance in kVA¹⁾	24.0
Continuous Performance in kW¹⁾	18.3
Continuous Performance in kVA¹⁾	21.6
Number of Phases	1
Frequency [Hz]	50

^{1) up to Panda 15000 / 12-4 cosPhi 0,85 for short take-off power to inductive loads, otherwise cosPhi1
1) from Panda 18 /17-4 on cosPhi 0,85 optional startup performance with compensation or starting current boost, otherwise cosPhi1}

Three Phase Version (Optional)

Alternator Type	HP3
Nominal Voltage in Volt [V]	400
Power rating factor Cos Pi	0.85
Nominal Performance in kW¹⁾	20.4
Nominal Performance in kVA¹⁾	24.0
Continuous Performance in kW¹⁾	18.4
Continuous Performance in kVA¹⁾	21.6
Number of Phases	3
Frequency [Hz]	50

3 Phase + 1 Phase (230V + 400V) (Optional)

The Alternator Type "DVS" (Dual Voltage System) comprises of two seperate windings (1-phase and 3-phase) within the stator. The windings are electrically isolated within same stator. This alternator type has a 12% reduction in performance, compared to the HP1 resp. HP3 winding type because the cross-section of the windings are reduced in order to fit both windings within the housing.

	DVS Winding - 1 phase	DVS Winding - 3 phase
Alternator Type	DVS
Nominal Voltage in in Volt [V]	230	3x400+N
Power rating factor Cos Pi	0.85	0.85
Number of Phases	3	1
Nominal Performance (P) in kW¹⁾	18.0	18.0
Nominal Performance (S) in kVA¹⁾	21.2	21.2
Continuous Performance in kW¹⁾	16.2	16.2
Continuous Performance in kVA¹⁾	19.1	19.1
Rated current each Phase in Ampere [A]	45.0
Continuous current each Phase in Ampere [A]	40.5
Frequency [Hz]	50	50

1) up to Panda 15000 / 12-4 cosPhi 0,85 for short take-off power to inductive loads, otherwise cosPhi1
1) from Panda 18 /17-4 on cosPhi 0,85 optional startup performance with compensation or starting current boost, otherwise cosPhi1

The technical parameters / output performance may vary for different generator types and exhaust emission norms for different countries.

All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

Engine Data

Engine Manufacturer	Kubota (KU)
Engine Type	V1505
No. Cylinders	4
Displacement [cm³]	1498
Starter System	12V (24V Optional)

Sound Insulation Cover (Generator Housing / Sound Shield)

PDF

Version	MPL 4DS
Article Number	GVS: 0015348 CAD REF:0005332
Drawing Ref.	FP1-024298
Sound Cover Type	MPL (Metal Professional Line)
Sound Insulation Material	4DS
Dimensions Housing L x W x H ^{) ))}	Refer to Capsule Drawing of Sound Shield
Total Weight of Generator with Capsule	Refer to Capsule Drawing of Sound Shield
Sound Cover Upgrade Options (on request)	->MPL 6DS

Disclaimer

All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

*) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

**) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.

Documentation

	Control - P6+ (p6+) Articlenumber :
	Generator Handbook / Operators Manual
	Capsule / Sound shield Drawing : FP1-024298 Articlenumber:0015348
	High Resolution Image: Panda 24 PVK-UK (p24 n pvk-uk p2.jpg)
	High Resolution Image: Panda 24 PVK-UK (p24 pvk-uk p1.jpg)
	High Resolution Image: Panda 24 PVK-UK (p24 pvk-uk p2.JPG)