Panda 22-4 PMS

General Technical Data

Model.:	Panda 22-4 PMS
Generator Type	Heavy Duty Line (1500 rpm / 50 Hz)
Generator Family	22-4 external 12V fuel pump
Generator Version.:	PMS Suitable for internal installation Low ambient temperatures External control panel with cable Dual circuit cooling
Article number.:	0014968
Additional Features	Alternator for charging the starter battery
Area of Application.:	Marine Generator (M)
Frequency [Hz]	50
Generator manufacturer	Fischer Panda GmbH
Isolation class of windings	H
Nominal Speed [rpm]	1500
Voltage Regulation	VCS
Voltage Tolerance with VCS (up to 80% Performance)	± 3V
Power rating factor Cos Pi	0.85
Excitation by	MKP Capacitors

Single Phase Winding - Standard version

Alternator Type	HP1
Nominal Voltage in Volt	230
Power rating factor Cos Pi	0.85
Nominal Performance in kW¹⁾	18.60
Nominal Performance in kVA¹⁾	21.9
Continuous Performance in kW¹⁾	16.7
Continuous Performance in kVA¹⁾	19.7
Number of Phases	1
Frequency [Hz]	50

^{1) up to Panda 15000 / 12-4 cosPhi 0,85 for short take-off power to inductive loads, otherwise cosPhi1
1) from Panda 18 /17-4 on cosPhi 0,85 optional startup performance with compensation or starting current boost, otherwise cosPhi1}

Three Phase Version (Optional)

Alternator Type	HP3
Nominal Voltage in Volt [V]	400
Power rating factor Cos Pi	0.85
Nominal Performance in kW¹⁾	18.60
Nominal Performance in kVA¹⁾	21.9
Continuous Performance in kW¹⁾	16.7
Continuous Performance in kVA¹⁾	19.7
Number of Phases	3
Frequency [Hz]	50

All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

Engine Data

Engine Manufacturer	Kubota (KU)
Engine Type	V2403
No. Cylinders	4
Displacement [cm³]	2434
Starter System	12V (24V Optional)

Sound Insulation Cover (Generator Housing / Sound Shield)

Fischer Panda Generator Capsule Drawing REF:FP1-035371.jpg

PDF

Version	MPL 4DS
Article Number	0014968 CAD REF:0004894
Drawing Ref.	FP1-035371
Sound Cover Type	MPL (Metal Professional Line)
Sound Insulation Material	4DS
Dimensions Housing L x W x H ^{) ))}	Refer to Capsule Drawing of Sound Shield
Total Weight of Generator with Capsule	Refer to Capsule Drawing of Sound Shield
Sound Cover Upgrade Options (on request)	->MPL 6DS

Disclaimer

All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

*) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

**) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.