Panda 24x-400V PMS

General Technical Data

Model.:Panda 24x-400V PMS
Generator TypeGenerators with regulated speed (3000 rpm 50 Hz)
  • Brushless
  • No signal noise
  • No rotating coils or diodes
  • Precise control
  • High protection rating
  • Perfect sine wave
  • Short-circuit stability
  • Water-cooled
  • Overload protection
Generator Family24x-400V
    Generator Version.:PMS
    • Suitable for internal installation
    • Low ambient temperatures
    • External control panel with cable
    • Dual circuit cooling
    Article number.:0023333
    Additional Features
      Area of Application.:Marine Generator (M)
      Frequency [Hz]50
      Generator manufacturerFischer Panda GmbH
      Isolation class of windingsH
      Nominal Speed [rpm]3000
      Voltage RegulationxControl
      Power rating factor Cos Pi0.85
      Excitation byMKP Capacitors

      Electrical Alternator

      Three Phase Version (Standard version)

      Alternator TypeHP3
      Nominal Voltage in Volt [V]400
      Power rating factor Cos Pi0.85
      Nominal Performance in kW1)20.40
      Nominal Performance in kVA1)24.0
      Continuous Performance in kW1)18.4
      Continuous Performance in kVA1)21.6
      Number of Phases3
      Frequency [Hz]50

      1) up to Panda 15000 / 12-4 cosPhi 0,85 for short take-off power to inductive loads, otherwise cosPhi1
      1) from Panda 18 /17-4 on cosPhi 0,85 optional startup performance with compensation or starting current boost, otherwise cosPhi1

      All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

      Engine Data

      Engine ManufacturerKubota (KU)
      Engine TypeV1505
      No. Cylinders4
      Displacement [cm3]1498
      Starter System12V (24V Optional)

      Sound Insulation Cover (Generator Housing / Sound Shield)


      VersionMPL 4DS
      Article Number0023333
      CAD REF:0023334
      Drawing Ref.FP1-053485
      Sound Cover TypeMPL (Metal Professional Line)
      Sound Insulation Material4DS
      Dimensions Housing    L x W x H *) *)) Refer to Capsule Drawing of Sound Shield
      Total Weight of Generator with Capsule Refer to Capsule Drawing of Sound Shield
      Sound Cover Upgrade Options (on request)->MPL 6DS


      All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

      *) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

      Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

      **) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.


      Service- / installation kits and shock mountings

      Note: Actual Service- / installation kits and shock mountings may differ from those displayed depending on Generator type.

      Service kit


      Shock-mounting, captive