Panda 7 mini PMS

General Technical Data

Model.:Panda 7 mini PMS
Generator TypePremium Line - Panda Standard Asynchronous (60Hz)
    Generator Family7 mini
    • external 12V fuel pump
    Generator Version.:PMS
    • Suitable for internal installation
    • Low ambient temperatures
    • External control panel with cable
    • Dual circuit cooling
    Article number.:0000171
    Additional Features
    • 12V/10A Alternator for charging the starter battery
    Area of Application.:Marine Generator (M)
    Frequency [Hz]60
    Generator manufacturerFischer Panda GmbH
    Isolation class of windingsH
    Nominal Speed [rpm]3600
    Voltage Regulationmini VCS
    Power rating factor Cos Pi1.00
    Excitation byMKP Capacitors

    Electrical Alternator

    Single Phase Winding - Standard version

    Alternator TypeHP1
    Nominal Voltage in Volt120
    Power rating factor Cos Pi1.00
    Nominal Performance in kW1)6.00
    Nominal Performance in kVA1)6.0
    Continuous Performance in kW1)5.4
    Continuous Performance in kVA1)5.4
    Number of Phases1
    Frequency [Hz] 60

    1) up to Panda 15000 / 12-4 cosPhi 0,85 for short take-off power to inductive loads, otherwise cosPhi1
    1) from Panda 18 /17-4 on cosPhi 0,85 optional startup performance with compensation or starting current boost, otherwise cosPhi1

    The technical parameters / output performance may vary for different generator types and exhaust emission norms for different countries.

    All performance data applies to generator operation at 100m above sea level at 20°C. Performance reductions can occur when operating at greater heights.

    Engine Data

    Engine ManufacturerKubota (KU)
    Engine TypeZ482
    No. Cylinders2
    Displacement [cm3]479
    Starter System12V (24V Optional)

    Sound Insulation Cover (Generator Housing / Sound Shield)


    VersionGFK 3D
    Article Number0000171
    CAD REF:0013339
    Drawing Ref.FP1-033967
    Sound Cover TypeGFK (Glass fibre reinforced polyester)
    Sound Insulation Material3D
    Dimensions Housing    L x W x H *) *)) Refer to Capsule Drawing of Sound Shield
    Total Weight of Generator with Capsule Refer to Capsule Drawing of Sound Shield
    Sound Cover Upgrade Options (on request)->MPL 4DS


    All technical data and specifications including dimensions, performance data, weight and material specifications are only valid when they are explicitly expressed in writing. All data should be considered only for approximation purposes because the data from these sources is gathered from current and previous models. As a result of continual product improvement and modification, the validity of technical data from these sources cannot be guaranteed. 3D-models are only provided on special request. It is the responsibility of the customer to ensure in all cases when ordering that technical data is valid and that the specifications meet his/her requirements.

    *) The dimensions are for the sound insulation housing ONLY and do not include additional parts or fittings such as fasteners, closures or mounting brackets etc.

    Therefore please note: You must consider the additional space will need to be calculated for the installation. This is of importance when planning the installation with respect of cables, hoses and mounting feet.

    **) Generators with DVS windings are slightly longer than those with HP1 or HP3 windings. Specific dimensions are available on request.

    Service- / installation kits and shock mountings

    Note: Actual Service- / installation kits and shock mountings may differ from those displayed depending on Generator type.

    Panda 7 mini Generator Versions